Tapered Spindle 1/2" Hole Right Side of Motor Polishing Buffing Wheel Holder

Description

TAPERED SPINDLE FOR 1/2" ARBOR  SHAFT
USE ON
1/2" SHAFT
MOTOR  -  WITH 1/2" DIAMETER HOLE
-
RIGHT HAND
THREAD  -  4-5
/16" LONG
-
Tapered Threaded Spindle is
Made in the U.S.A.
manufactured with close tolerances, runs true without any vibration with optimal performance of wheels and accessories being used.
This Arbor - Spindle is used to hold Wheels with 1/8" Pin Hole Centers: Polishing Buffs and Felt Wheels, Satin Finsh wheels, Wood Hub Brushes...
Spindle has a 1/2" arbor hole to work on 1/2" shaft Grinders, Motors or Polishers.   The arbor is made and threaded to be used on the RIGHT Side of the motor. Spindle has a pair of Allen Head Set Screws to attach to your motor shaft.
Note: Always slightly tighten the front most set screw and then the one closest to the motor. Final tightness should be done after both are equally tight.
FEATURES:
·
Precision Quality
·
Machining is done by CNC Equipment
·
Made of Steel and Anodized Finish
·
Allen Set Screws do not protrude above the main shaft of the spindle.
SPECIFICATIONS:
JETS Product # 1603-192414
-
Material:
Cold Rolled Steel
-
Overall Length:
4-5/16" - 109mm
-
Arbor Body Diameter:
3/4" - 19mm
-
Spindle Body Length:
2-9/16" - 65mm
-
Spindle Shaft Depth:
1-5/16" - 33.3mm
-
Arbor Hole
:
1/2" - 12.7mm
for Shaft Connection
-
Weight:
3.5oz. - 100gr
Spindle is made to be
used on a 1/2" shaft
diameter and on the
Right Hand Side of Motor
with
forward direction
.
NOTE: DO NOT USE
Tapered Spindles to hold Grinding Stone Wheels or Hard Heavy Wheel -
IT IS
EXTREMELY
DANGEROUS TO DO SO!
SHIPPING:
Via USPS FIRST CLASS MAIL
NOTE: Visit
JETSTOOLS
ebay Store Listings, where you can see various sizes of Spindles, Arbors, Miniature Mandrels and Holders along with more
J
ewelers
E
quipment
T
ools and
S
upplies
.
JETS Inc.
E4 612 CKP  Z  M