Spindle Tapered 1/4" Arbor Hole Tapered Threaded Left Hand Grinder-Buffer-Motor

Description

TAPERED SPINDLE FOR 1/4" ARBOR  SHAFT
USE ON
1/4" SHAFT
- GRINDER - BUFFER OR MOTOR
LEFT HAND
THREAD  -  4-5
/16" LONG
Tapered Threaded Spindle is made in the U.S.A. manufactured with close tolerances, runs true without any vibration with optimal performance of wheels and accessories being used.
This Arbor - Spindle is used to hold Wheels with 1/8" Pin Hole Centers: Polishing Buffs and Felt Wheels, Satin Finish wheels, Wood Hub Brushes...
NOTE: DO NOT USE
Tapered Spindles to hold Grinding Stone Wheels or Hard Heavy Wheel -
IT IS EXTREAMLY DANGEROUS TO DO SO!
Spindle has a 1/4" arbor hole to work on 1/4" shaft Grinders, Motors or Polishers.
The arbor is made and threaded to be used on the LEFT
Side
of the motor
. Spindle has a pair of Allen Head Set Screws to attach to your motor shaft.
Note: Always slightly tighten the front most set screw and then the one closest to the motor. Final tightness should be done after both are equally tight.
FEATURES:
·
Precision Quality
·
Machining is done by CNC Equipment
·
Made of Steel and Anodized Finish
·
Allen Set Screws do not protrude above the main shaft of the spindle.
SPECIFICATIONS:
JETS Product # 1603-291414
-
Material:
Cold Rolled Steel
-
Overall Length:
3-5/8" - 92mm
-
Arbor Body Diameter:
5/8" - 15.9mm
-
Spindle Body Length:
2-1/4" - 57.2mm
-
Spindle Shaft Depth:
55/64" - 21.75mm
-
Arbor Hole
:
1/4" - 6.3mm
for Shaft Connection
-
Weight:
2.3oz. - 66grm
Spindle is made to be
used on a 1/4" shaft
diameter and on the LEFT
Hand Side of Motor
with
forward direction
.
NOTE: DO NOT USE
Tapered Spindles to hold Grinding Stone Wheels or Hard Heavy Wheel -
IT IS EXTREAMLY DANGEROUS TO DO SO!
SHIPPING:  Via USPS FIRST CLASS MAIL
NOTE: Visit
JETSTOOLS
ebay Store Listings, where you can see various sizes of Spindles, Arbors, Miniature Mandrels and Holders along with more
J
ewelers
E
quipment
T
ools and
S
upplies
.
JETSINC.
0620 E3 CKSP  Z M