5" Inch Wall Vent

Description

When venting through a wall is the best option, a quality wall vent should be considered. Vent Works 5" inch, heavy gauge wall vents are not available at your local home improvement or general hardware store. There are 3 different material options; galvanized (26 gauge), white powder coated steel (26 gauge) and aluminum (high grade). There are 3 different utility options; damper only, screen only, damper and screen. The backdraft damper is spring loaded to prevent drafting from outside. The screen is 1/4” inch galvanized steel mesh. Our vents are used in a wide variety of commercial and residential applications including heating systems, bathroom exhaust, kitchen exhaust, laundry room exhaust, venting spray booths, laser engraving machines, exhaust fan blowers, virtually anything with a 5" inch round exhaust.
To Install: Cut a 5-1/8” inch hole in the side wall and install, be sure to seal it.
5" Inch Wall Vent
Specifications
Downloadable
Wall Vent Specification Sheet
Duct Diameter: 5" Inch
Duct Length: 8.5" Inch
Flange Width: 7" Inch
Flange Height: 7" Inch
Hood Depth: 3.6" Inch
Hood Width: 3.6" Inch
Material: 26 Gauge Galvanized Steel, Powder Coated Steel or Aluminum.
Options: Damper Only, Screen Only or Damper and Screen.
1/4" Inch Metal Screen
Spring-Loaded Back Draft Damper
Open-Cell Foam Weather Seal on Damper
Made In USA