2x72" Belt Grinder wheels-5" Drive-19mm shaft, 3" Track-2" Idler-Hinge Bracket

Description

Belt Grinder wheel set knife grinder 5.1" Drive 19 mm shaft 3" tracking, 2" Idler
CNC machined from
Aluminum
6061
Note: Set
Does Not
include any mounting Axles/Bolts
Wheel Set Description
Set Includes:
One
130 mm (5.1") diameter Drive Wheel:
D
rive wheel is CNC machined with 19 mm bore (H7 tolerace).  Bore is equipped with a 6 mm key way and a set screw. Wheel is 55 mm wide (2.2"). Bore is 35 mm long (1.4"). Surface of wheel is truly crowned to insure belt won't jump off wheel . Please refer to the wheel's sketch for the exact wheel dimensions
Two
50 mm diameter Idler Wheels:
E
ach wheel is CNC machined and fitted with
three
12 mm bearings. (Heavy duty 6201 RS bearings)  Bearings are rubber sealed to protect from dust. Bearings are placed back to back (best combination). 10 mm wide standoff (sleeve) will raise the wheel of the mounting plate. This bearing combination is the best tested solution against bearing failure as it allow for tightening the mounting bolts without causing any axial force on the bearings
(ball bearings should not bear lateral load)
One
75 mm diameter Track Wheel:
E
ach wheel is
CNC machined and
fitted with
three
12 mm bearings. (Heavy duty 6201 RS bearings)  Bearings are rubber sealed to protect from dust. Bearings are placed back to back (best combination). 10 mm wide standoff (sleeve) will raise the wheel of the mounting plate. This bearing combination is the best tested solution against bearing failure as it allow for tightening the mounting bolts without causing any axial force on the bearings
(ball bearings should not bear lateral load)
One
Hinge Bracket for the Tracking Wheel:
M
ade from Steel
Shipping
We understand that customers would like to receive their purchase as soon as possible. Therefore I provide postage service that is comparable -in speed- to local postal service. And to achieve that:
All orders are shipped using GLS or FedEx economy depending on destination
All order are shipped the same working day if paid by 3 PM central European time
From experience, in most cases; Items arrive in 2-6 work days to all EU countries
From experience, in most cases; Items arrive in 4-10 work days to North America
From experience, in most cases; Items arrive in 5-15 work days to Australia and New Zealand
Limitation of Liability
In no event shall pulley-wheel be liable for any direct, indirect, punitive, incidental, special consequential damages, to property or life, whatsoever arising out of or connected with the use or misuse of its products.